28
english
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Battery pack DCB180 DCB181 DCB182
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18
Capacity Ah 3.0 1.5 4.0
Weight kg 0.64 0.35 0.61
Battery pack DCB183/B DCB184/B DCB185
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18
Capacity Ah 2.0 5.0 1.3
Weight kg 0.40/0.45 0.62/0.67 0.35
Charger DCB105
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah)
55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah)
Weight kg 0.49
Charger DCB107
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 60 (1.3 Ah) 70 (1.5 Ah) 90 (2.0 Ah)
140 (3.0 Ah) 185 (4.0 Ah) 240 (5.0 Ah)
Weight kg 0.29
Charger DCB112
Mains voltage V
AC
230
Battery type 10.8/14.4/18 Li-Ion
Approx. charging time
of battery packs
min 40 (1.3 Ah) 45 (1.5 Ah) 60 (2.0 Ah)
90 (3.0 Ah) 120 (4.0 Ah) 150 (5.0 Ah)
Weight kg 0.36
Congratulations!
You have chosen a
tool. Years of
experience, thorough product development and
innovation make D
WALT one of the most reliable
partners for professional power tool users.
Technical Data
DCF899, DCF899H
Voltage V
DC
18
Type 1
Battery Type Li-Ion
No load speed min
-1
0–400
0–1200
0–1900
Impact rate min
-1
0–2400
Max torque Nm 950
Weight (without battery pack) kg 2.6
Noise values and vibration values (triax vector sum) according to
EN60745-2-2.
L
PA
(emission sound
pressure level) dB(A)
101
L
WA
(sound power level) dB(A)
112
K (uncertainty for the given
sound level) dB(A)
3
Impact tightening of fasteners at the maximum capacity of
the tool
Vibration emission value a
h
=
m/s²
13.0
Uncertainty K = m/s²
5.9
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
CORDLESS IMPACT WRENCH
DCF899, DCF899H
English (original instructions)
To Next Page
Loading...
