DeWalt DCF899 - Cordless Impact Wrench

15
ENGLISH
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
workingperiod.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Cordless Impact Wrench
DCF899, DCF899H
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1-2015, EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
22.09.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY SAFETY REGULATIONS
2008
Cordless Impact Wrench
DCF899, DCF899H
DeWALT declares that these products described under
Technical Data are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
2006/42/EC, EN62841-1-2015, EN62841-2-2:2014.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact DeWALT at the following
address or refer to the back of the manual.
DCF899, DCF899H
Voltage V
DC
18
Type 4
Battery type Li-Ion
No load speed min
-1
0–400
0–1200
0–1900
Impact rate min
-1
0–2400
Max torque Nm 950
Weight (without battery pack) kg 2.7
Noise values and/or vibration values (triax vector sum) according to EN62841-2-2:
L
PA
(emission sound pressure level) dB(A) 101
L
WA
(sound power level) dB(A) 112
K (uncertainty for the given sound
level)
dB(A) 3
Impact tightening of fasteners at the maximum capacity of the tool
Vibration emission value a
h
= m/s
2
13.0
Uncertainty K = m/s
2
5.9
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
CORDLESS IMPACT WRENCH
DCF899, DCF899H