ENGLISH
3
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Battery pack DCB180 DCB181 DCB182
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18
Capacity A
h
3.0 1.5 4.0
Weight kg 0.64 0.35 0.61
Battery pack DCB183 DCB184 DCB185
Battery type Li-Ion Li-Ion Li-Ion
Voltage V
DC
18 18 18
Capacity A
h
2.0 5.0 1.3
Weight kg 0.40 0.62 0.35
Charger DCB105
Mains voltage V
AC
230 V
Battery type Li-Ion
Approximate min 25 30 40
charging time (1.3 Ah) (1.5 Ah) (2.0 Ah)
of battery packs 55 70 90
(3.0 Ah) (4.0 Ah) (5.0 Ah)
Weight kg 0.49
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
DCF899, DCF899H
Voltage V
DC
18
Type 1
Battery Type Li-Ion
No load speed min
-1
0–400
0–1200
0–1900
Impact rate min
-1
0–2400
Max torque Nm 950
Weight (without battery pack) kg 2.6
Noise values and vibration values (triax vector sum) according to
EN60745-2-2.
L
PA
(emission sound
pressure level) dB(A)
101
L
WA
(sound power level) dB(A)
112
K
WA
(uncertainty for the given
sound level) dB(A)
3
Impact tightening of fasteners at the maximum capacity of
the tool
Vibration emission value a
h
=
m/s²
13.0
Uncertainty K = m/s²
5.9
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
CORDLESS IMPACT WRENCH
DCF899, DCF899H
To Next Page
Loading...
Need help?
General
