DeWalt DCL508 - Page 9

English
7
 • Donotuseanextensioncordunlessitisabsolutelynecessary.
Use of improper extension cord could result in risk of fire,
electric shock, or electrocution.
 • Donotplaceanyobjectontopofchargerorplacethe
charger on a soft surface that might block the ventilation
slotsandresultinexcessiveinternalheat. Place the charger in
a position away from any heat source. The charger is ventilated
through slots in the top and the bottom of the housing.
 • Donotoperatechargerwithdamagedcordorplug— have
them replaced immediately.
 • Donotoperatechargerifithasreceivedasharpblow,been
dropped, or otherwise damaged in any way. Take it to an
authorised service centre.
 • Donotdisassemblecharger;takeittoanauthorisedservice
centre when service or repair is required. Incorrect reassembly
may result in a risk of electric shock, electrocution or fire.
 • Incaseofdamagedpowersupplycordthesupplycordmustbe
replaced immediately by the manufacturer, its service agent or
similar qualified person to prevent any hazard.
 • Disconnectthechargerfromtheoutletbeforeattemptingany
cleaning.Thiswillreducetheriskofelectricshock.Removing
the battery pack will not reduce this risk.
• NEVERattempt to connect 2 chargers together.
 • Thechargerisdesignedtooperateonstandard220-240V
householdelectricalpower.Donotattempttouseitonany
other voltage. This does not apply to the vehicular charger.
Save tHeSe inStructionS
Chargers
The DCB105, DCB107 and DCB112 chargers accepts 10.8 V Li-Ion
batteries.
These chargers require no adjustment and are designed to be as easy
as possible to operate.