7
ENGLISH
Contents
• Laser Information
• User Safety
• Battery Safety
• Powering the Laser
• Operating Tips
• Turning the Laser ON
• Checking Laser Accuracy
• Field Calibration Check
• Using the Laser
• Maintenance
• Troubleshooting
• Accessories
• Service and Repairs
• Warranty
• Specifications
Laser Information
The DCLE34031 3x360 Laser is a Class 2laser product. It is a
self-leveling laser tool that can be used for horizontal (level)
and vertical (plumb) alignmentprojects.
User Safety
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
If you have any questions or comments about this or any
dewalt tool, go to www.D
EWALT.co.kr on theInternet.
WARNING: Never modify the tool or any part of it.
Damage to the laser or personal injury couldresult.
WARNING: Read and understand all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or seriousinjury.
SAVE THESE INSTRUCTIONS
WARNING: Laser Radiation Exposure. Do not
disassemble or modify the laser level. There are
no user serviceable parts inside. Serious eye injury
couldresult.
WARNING: Hazardous Radiation. Use of controls
or adjustments or performance of procedures other
than those specified herein may result in hazardous
radiationexposure.
CAUTION: Keep fingers clear of the back plate and
stud when mounting with magnets. Fingers may
becomepinched.
CAUTION: Do not stand underneath the laser when
it is mounted with the magnet bracket. Serious
personal injury or damage to the laser may result if the
laserfalls.
The label on your tool may include the followingsymbols.
V.............................volts
mW.......................milliwatts
.........................laser warning symbol
nm........................wavelength in nanometers
2.............................Class 2Laser
Warning Labels
For your convenience and safety, the following labels
are on yourlaser.
WARNING: To reduce the risk of injury, user
must read instructionmanual.
WARNING: LASER RADIATION. DO NOT
STARE INTO BEAM. Class 2LaserProduct.
WARNING: Keep clear of magnet. Magnet
hazard can disturb pacemaker operation
and result in serious injury ordeath.
• If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may beimpaired.
• Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust orfumes.
• Use the laser only with the specifically designated
batteries. Use of any other batteries may create a risk
offire.