DeWalt DCMBA572N - AXIAL BLOWER DCMBA572; Technical Data; EC-Declaration of Conformity; Safety Guidelines Definitions

ENGLISH
3
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN50636-2-100 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/
or noise emission level represents the main applications
of the tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration and/or noise emission may
differ. This may significantly increase the exposure level
over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
DCMBA572
Voltage V
DC
54
Type 1
Battery type Li-Ion
Sound power level LwAm 106 dBA
Sound power level KwA 1.0 dBA
Sound pressure level LpA 97 dBA
Sound pressure level KpA 1.2 dBA
Guarenteed sound power level LwAd 107 dBA
Weight (without battery pack) kg 3.1 kg
Noise values and/or vibration values (triax vector sum) according to
EN50636-2-100:2014:
Vibration emission value a
h
= m/s
2
<2.5
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a
DEWALT
tool. Years of experience, thorough
product development and innovation make
DEWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
AXIAL BLOWER
DCMBA572
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderateinjury.
EC-Declaration of Conformity
Machinery Directive
Axial Blower
DCMBA572
DEWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN 60335-1:2012+A11:2014+A13:2017 and EN
50636-2-100:2014. 2000/14/EC , Annex V DEKRA Certification
B.V., Meander 1051 / P.O. Box 5185 6825 MJ ARNHEM / 6802 ED
ARNHEM Netherlands
Notified Body ID No.: 0344
LPA (measured sound pressure level) 97 dB(A) K=1,2 dB(A)
LWA (guaranteed sound power) 107 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DEWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DEWALT
.
Markus Rompel
Vice-President Engineering, PTE-Europa
DEWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
23.07.2019