DeWalt DCMBL562 User Manual

ENGLISH
3
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN 50636-2-100 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/
or noise emission level represents the main applications
of the tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration and/or noise emission may
differ. This may significantly increase the exposure level
over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
workpatterns.
DCMBL562
Voltage V
DC
18
Type 1
Battery type Li-Ion
Air Speed Km/h 200
Air Volume CFM 450
Sound power level LwAm 95 dBA
K (uncertainty for the given sound level) KwA 1.7 dBA
Sound pressure level LpA 88 dBA
K (uncertainty for the given sound level) KpA 2.5 dBA
Guaranteed sound power level LwAd 97 dBA
Weight (without battery pack) kg 3.1 kg
Noise values and/or vibration values (triax vector sum) according to
EN 50636-2-100:2014:
Vibration emission value a
h
= m/s
2
<2.5
Uncertainty K = m/s
2
1.5
English (original instructions)
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
AXIAL BLOWER
DCMBL562
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderateinjury.
EC-Declaration of Conformity
Machinery Directive
Axial Blower
DCMBL562
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN 60335-1:2012+A11:2014+A13:2017 and EN
50636-2-100:2014. 2000/14/EC , Annex V DEKRA Certification
B.V., Meander 1051 / P.O. Box 5185 6825 MJ ARNHEM / 6802 ED
ARNHEM Netherlands
Notified Body ID No.: 0344
LPA (measured sound pressure level) 88 dB(A) K=2.5 dB(A)
LWA (guaranteed sound power) 97 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europa
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
30.10.2019

DeWalt DCMBL562 Specifications

General

Brand	DeWalt
Model	DCMBL562
Category	Blower
Language	English