DeWalt DCMST561N - Technical Data and Safety Information; Noise and Vibration Levels; Hazard Definitions

ENGLISH
5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN50636-2-91 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
DCMST561
Voltage V
DC
18
UK & Ireland V
DC
18
Type 2
Battery type Li-Ion
Power output W 400
RPM
0–4600/
0–6000
Cutting Swath Size mm 350
Swath cm 36
Weight (without battery pack) kg 3.6
Noise values and vibration values (triax vector sum) according to
EN50636-2-91:2014
L
PA
(emission sound pressure level) dB(A) 79
K (uncertainty for the given sound level) dB(A) 2.1
L
WA
(sound power level) dB(A) 93.5
K (uncertainty for the given sound level) dB(A) 2.6
Vibration emission value a
h
= m/s
2
3.9
Uncertainty K = m/s
2
1.5
English (original instructions)
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
STRING TRIMMER
DCMST561
EC-Declaration of Conformity
Machinery Directive
String Trimmer
DCMST561
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017 + A1:2019
+ A14:2019 + A2:2019 EN50636-2-91:2014.
2000/14/EC, Lawn Trimmer, L ≤ 50 cm, Annex VI
DEKRA Certification B.V.
Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM, Netherlands
Notified Body ID No.: 0344
Level of accoustic power according to 2000/14/EC
(Article 12, Annex III, L ≤ 50 cm=):
L
PA
(measured emission sound pressure) 79 dB(A)
uncertainty (K) = 2.1 dB(A)
L
WA
(guaranteed sound power) 96 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
15.10.2020
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.