DeWalt DCR028B User Manual

ENGLISH
7
Fig. D
16
17
Power/Volume Adjustment (Fig.A)
1. To turn the radio on and off, press the ON/OFF/Volume
button
1
.
2. Turn the ON/OFF/Volume button clockwise to
increase the volume. To decrease the volume,
turncounterclockwise.
NOTE: the volume can also be muted by pressing the
mute button
6
.
Mode Function (Fig.A)
To choose one of the mode functions(FM, AM, AUX or
Bluetooth®) push the mode button
4
until the desired
function is found.
NOTE: Pressing the Bluetooth® button
9
also puts the radio
into Bluetooth®mode.
Tune or Seek Function (Fig.A)
There are two tuning methods and one seek method for
finding the desiredfrequency.
To tune:
Press and release the right or left arrow button
3
. Repeat
until the desired frequency isfound.
To seek:
Press and hold the right or left arrow button
3
for
2seconds. The tuner frequency will change to the first radio
station with acceptable clarity and stop at thatstation.
NOTE: When the radio is paired to a Bluetooth® device the
right and left arrow buttons
3
can be used to skip or go to
previous tracks on the audiodevice.
To Program the Radio Preset Buttons
(Fig.A)
There are six presets for FM and six for AM. After
programming the buttons, pressing 1, 2, 3, 4, 5 or 6 will
instantly change the frequency to the presetstation.
1. Turn poweron.
2. Set the radio to desired station (see Tune or
SeekFunction).
3. Press and hold one of the desired radio preset
buttons
5
until the button number appears on the
right side of the LCD. The radio preset button is nowset.
4. Repeat steps 2 and 3 to set the other radio presetbuttons.
To Adjust the EQ (Fig.A)
Sound quality can be adjusted by changing the equalization
of the bass or treble of theradio.
1. Press the EQ button
7
to select bass ortreble.
2. Press the right arrow
3
button to increase the selected
setting or the left arrow
3
button to decreaseit.
3. Once desired adjustment is achieved, leave all buttons
released for more than 3 seconds. The procedure
will exit and the equalization adjustment will
remainactivated.
Playing Audio from an External
Device(Fig.A, E)
Audio can be played through the radio via a wireless
Bluetooth® connection to a compatible Bluetooth® device
or by connecting audio device or mobile phone using a 1/8"
(3.5 mm) audio cable to the audio port
10
located on the
front controlpanel.
Fig. E
10
11
Pairing Radio with a Bluetooth® Audio
Device
1. Place the radio and the Bluetooth® audio source within
3.3' (1m) of eachother.
2. Turn radio on by pressing the ON/OFF/Volume
button
1
.
3. Press the Bluetooth® button
9
or use the mode button
to put the unit into Bluetooth® (BT) mode. The LCD
display
8
will read “Disconnected” if no device is paired.
4. If another device is to be paired, press and hold the
Bluetooth® button for 3 seconds. The LCD display
will read “Ready to pair” and the radio will sound a
singlebeep.
5. Confirm pairing on your device. (Please consult
your device's instruction manual for specific pairing
instructions.)
6. Once pairing is successful, the radio will sound a double
beep and the LCD display will read “Connected.”
NOTE: The radio will sound a downward tone if it
becomes disconnected from the paired device.
Connecting a Previously Paired
Bluetooth® Audio Device
If a Bluetooth® device has been previously paired to
the radio it should automatically reconnect when radio
is powered on. Within 4 seconds the radio will go into
connecting mode. Once the previously paired Bluetooth®
device is recognized and connected, the LCD display will

DeWalt DCR028B Specifications

General

Brand	DeWalt
Model	DCR028B
Category	Radio
Language	English