DeWalt DCS691 - Technical Data; Ec Declaration of Conformity

ENGLISH
3
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
Cut-Off Tool
DCS691
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010,
EN60745‑2‑22:2011+A11:2013.
These products also comply with Directive 2014/30/EU,
2014/53/EU and 2011/65/EU. For more information, please
contact DeWALT at the following address or refer to the back of
themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Director Engineering
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
15.03.2022
WARNING: To reduce the risk of injury, read the
instructionmanual.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008 AND RADIO EQUIPMENT
REGULATION 2017
Cut-Off Tool
DCS691
DeWALT declares that these products described under
Technical Data are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60745‑1:2009+A11:2010, EN60745‑2‑22:2011+A11:2013.
These products conform to the following UK Regulations:
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
DCS691
Voltage V
DC
54
Type 1
Battery type Li‑Ion
Wheel diameter mm 230
Wheel bore mm 22.2
No load/rated speed min‑1 6600
Wheel perimeter thickness (max.)
Metal mm 3.6
Resin‑bonded mm 3.6
Thread size M8
Water quick connector mm 12.5
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
MHz
mW
433
0.03
Weight (without battery pack) kg 5.7
Noise values and vibration values under load (triax vector sum) according to
EN60745‑2‑22:
L
PA
(emission sound pressure level) dB(A) 105
L
WA
(sound power level) dB(A) 116
K (uncertainty for the given sound level) dB(A) 3.0
Vibration emission value a
h
= m/s
2
5.0
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
CUTOFF TOOL
DCS691