DeWalt DCT414 - Technical Data; Defi Nitions: Safety Guidelines; General Tool Safety Warnings

ENGLISH
27
10.8 V CORDLESS IR THERMOMETER
DCT414
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional tool users.
Technical Data
DCT414
Voltage V
DC
10.8
Type 1
Battery Type Li-Ion
Power output W 0.5
Distance to spot D:S Approximately 12:1
Temperature range ºC -30º C to 550º C
Emissivity 0.1 to 1
Emissivity adjustability in 0.01 increments
Accuracy +/-1.5% or +/-1.5º C,
whichever is greater
on a black body source
(EMS 0.95)
Laser power mW < 1, CLASS 2
LASER PRODUCT
Laser wavelength nm 620 – 690
Weight (without
battery pack) kg 0.3
Battery pack DCB121
Battery type Li-Ion
Voltage V
DC
10.8
Capacity A
h
1.3
Weight kg 0.2
Charger DCB100
Mains voltage V
AC
230
Battery type Li-Ion
Approx. charging time min 40
(1.3 Ah battery packs)
Weight kg 0.3
Fuses (Charger)
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
LASER INFORMATION
The Infrared Thermometer (IR thermometer) is a
Class 2 laser product and complies with 21 CFR
1040.10 and 1040.11 except for deviations pursuant
to laser notice No. 50, dated June 24, 2007.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
General Tool Safety Warnings
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
c) Keep children and bystanders away while
operating a tool.