DeWalt DW030 - Page 45

english
43
 • Alwayssetupthelaseratapositionwherethelaserbeamcannot
cross any person at eye level. Be extra alert for the presence of
stairs and specular surfaces.
Residual Risks
The following risks are inherent to the use of this device:
– injuries caused by staring into laser beam.
Markings on Tool (fig. 1)
The following pictographs are shown on the tool:
=
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT POWER
<1mW@620nm-690nm
IEC60825-1:2007
Read instruction manual before use.
Laser warning.
Do not stare into the laser beam.
Protection class: IP54.
DATE CODE POSITION
The Date Code, which also includes the year of manufacture, is printed
on the inside of the battery compartment.