DeWalt DW03101 - User Manual

Dewalt DW03101
1
EN
Table of Contents
Instrument Set-up- - - - - - - - - - - - - - - - - - - - - - -2
Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - -4
Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Adjusting measuring reference / tripod - - - - - - - - - - -4
Multifunctional endpiece- - - - - - - - - - - - - - - - - - - - - - 5
Distance unit setting - - - - - - - - - - - - - - - - - - - - - - - - 5
Tilt unit setting- - - - - - - - - - - - - - - - - - - - - - - - - - - - -5
Timer (automatic release) - - - - - - - - - - - - - - - - - - - - 5
Beep ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - - - -6
Illumination ON/OFF - - - - - - - - - - - - - - - - - - - - - - - -6
Measuring Functions - - - - - - - - - - - - - - - - - - -7
Measuring single distance - - - - - - - - - - - - - - - - - - - -7
Permament / Minimum-Maximum measuring - - - - - - -7
Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -8
Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9
Triangular area - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - 11
Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - 11
Pythagoras (partial height) - - - - - - - - - - - - - - - - - - - 12
Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
Smart Horizontal Mode - - - - - - - - - - - - - - - - - - - - - 13
Height tracking - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Leveling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Memory (20 last displays) - - - - - - - - - - - - - - - - - - - 15
Delete Memory - - - - - - - - - - - - - - - - - - - - - - - - - - -15
Calibration - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16
Calibration of tilt sensor (Tilt Calibration) - - - - - - - - -16
Technical Data - - - - - - - - - - - - - - - - - - - - - - - - -17
Message Codes - - - - - - - - - - - - - - - - - - - - - - - -18
Care - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18
Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18
Safety Instructions - - - - - - - - - - - - - - - - - - - - -18
Areas of responsibility - - - - - - - - - - - - - - - - - - - - - -18
Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19
Electromagnetic Compatibility (EMC)- - - - - - - - - - - -19
FCC statement (applicable in U.S.) - - - - - - - - - - - - -20
Laser classification- - - - - - - - - - - - - - - - - - - - - - - - -20
Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -20

Summary

Instrument Setup

Introduction and Overview

Covers reading safety instructions and a visual guide to the device's components.

Display Elements and Battery Insertion

Details the instrument's display symbols and the correct procedure for inserting batteries.

Device Operations

Powering On;Off and Clearing Actions

Instructions for device power management and undoing the last operation.

Message Codes and Reference Adjustment

Explains interpreting error messages and setting the measurement reference point.

Endpiece Functionality and Unit Settings

Details the multifunctional endpiece and changing distance/tilt units.

Timer, Beep, and Illumination Control

Covers the automatic release timer and managing audio/visual feedback.

Measurement Functions

Basic Distance Measurements

Guides on single, permanent, min/max, and add/subtract distance measurements.

Area and Volume Calculations

Step-by-step instructions for measuring the area and volume of surfaces.

Geometric Measurements

Covers triangular area, Pythagoras theorem, and partial height measurements.

Stake Out and Horizontal Mode

Guides on marking points and using the device for horizontal alignment.

Height Tracking and Leveling

Details continuous height tracking and using the device for leveling applications.

Memory Management

Instructions for viewing stored measurements and clearing the device memory.

Calibration

Tilt Sensor Calibration Procedure

Step-by-step guide to calibrate the tilt sensor for accurate readings.

Technical Data

Safety Guidelines

Responsibilities and Usage Rules

Outlines responsibilities for manufacturer/user and covers permitted/prohibited use.

Hazards, Limits, and Disposal

Warns about operational hazards, limits, and provides disposal instructions.

Regulatory Compliance and Laser Safety

Covers FCC compliance, laser classification, and device labelling requirements.

DeWalt DW03101 Specifications

General

Type	Laser distance meter
Display type	Digital
Product color	Black, Yellow
Distance measuring units	m
Accuracy	1 mm
Laser class	2
Maximum measurement distance	100 m
Battery type	AAA
Battery voltage	1.5 V
Battery included	Yes

Weight and Dimensions

Weight	154 g