DeWalt DW03101 User Manual

Dewalt DW03101
7
EN
Measuring Functions
Measuring single distance
1
Aim active laser at target.
2
8.532 m
3
i
Target surfaces: Measuring
errors can occur when meas-
uring to colourless liquids,
glass, styrofoam or semi-per-
meable surfaces or when
aiming at high gloss surfac-
es. Against dark surfaces the
measuring time increases.
Permament / Minimum-Maximum measuring
1
2 sec
8.532 m
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values)
The minimum and maximum dis-
tance measured is displayed
(min, max.). The last value meas-
ured is displayed in the main line.
min. max.
2
Stops permanent / minimum-
maximum measuring.
3
Add / Subtract
7.332 m
1
The next meas-
urement is added
to the previous
one.
2
The next meas-
urement is sub-
tracted from the
previous one.
5.5I5 m
I2.847 m
3
i
The result is shown in the
main line and the measured
value above. This process
can be repeated as required.
The same process can be
used for adding or subtracting
areas or volumes.

DeWalt DW03101 Specifications

General

Type	Laser distance meter
Display type	Digital
Product color	Black, Yellow
Distance measuring units	m
Accuracy	1 mm
Laser class	2
Maximum measurement distance	100 m
Battery type	AAA
Battery voltage	1.5 V
Battery included	Yes

Weight and Dimensions

Weight	154 g