DeWalt DW03101 - Endpiece Functionality and Unit Settings; Timer, Beep, and Illumination Control

Dewalt DW03101
Operations
5
EN
Multifunctional endpiece
i
The orientation
of the endpiece
is automatically
detected and
the zero point is
accordingly ad-
justed.
Distance unit setting Tilt unit setting
0.000 m
0.0000 m
0.00 m
0.00 ft
0'00" 1/32
0.00 in
0 in 1/32
Switch between the
following units:
2 sec
180 °
0.0 %
Switch between the
following units:
2 sec
simultaneously
Timer (automatic release)
s
1
Adjust delay of au-
tomatic release
(max. 60 sec,
standard setting
5sec)
2
i
Once the key is released with the la-
ser activated, the remaining seconds
until the measurement are displayed
in a countdown. The delayed release
is recommended for precise aiming
e.g. at long distances. It avoids shak-
ing of the device when pressing the
measurement key.