DeWalt DW03050 - Measuring Volume; Adding;Subtracting Volumes; Measuring Tall Object Height (Distance to 1 Point)

12
ENGLISH
- Press to display the length measurement on the
second line of the screen.
8. Follow the same steps to measure the width and length of
the second wall, floor, or object.
9. View the Area measurement at the bottom of the screen
(Figure M 3).
Measuring Volume
You can measure the volume of a room or object (Figure N).
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press (Figure A 3) to turn the tool on.
3. Make sure the tool position setting (Figure C 4) is correct for
taking the measurement.
4. Select as the measurement type.
- Press to display the Main Menu (Figure E 2).
- Press to select .
- Press to display the Measurement Type Menu
(Figure E 3).
- Press the arrow buttons to select .
- Press .
5. Measure the width (Figure N 1).
- Point the top of the tool at one side of the room or object.
- Position the tool at one end of the room or object and
point the laser dot across the width. (Figure N 1) shows
where to position the tool if you are measuring from the
bottom of the tool.)
- Press to display the width measurement at the top
of the screen.
6. Measure the length (Figure N 2).
- Position the tool at one end of the room or object and
point the laser dot across the length. (Figure N 2) shows
where to position the tool if you are measuring from the
bottom of the tool.)
- Press to display the length measurement on the
second line of the screen.
7. Measure the height (Figure N 3).
- Position the tool at one end of the room or object and
point the laser dot across the length. (Figure N 3) shows
where to position the tool if you are measuring from the
bottom of the tool.)
- Press to display the length measurement on the
third line of the screen.
8. View the Volume measurement at the bottom of the screen
(Figure N 4).
Adding/Subtracting 2 Volumes
You can measure the volume of room or object and then add
it to, or subtract it from, the volume of another room or object
(Figure O).
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press (Figure A 3) to turn the tool on and display the
red laser dot.
3. Make sure the tool position setting (Figure C 4) is correct for
taking the measurement.
4. Select as the measurement type.
- Press to display the Main Menu (Figure E 2).
- Press to select .
- Press to display the Measurement Type Menu
(Figure E 3).
- Press the arrow buttons to select .
- Press .
5. Press to add, or to subtract, the volumes of two rooms
or objects.
6. Measure the width (Figure O 1).
- Position the tool at one end of the room or object and
point the laser dot across the width. (Figure O 1) shows
where to position the tool if you are measuring from the
bottom of the tool.)
- Press to display the width measurement at the top
of the screen.
7. Measure the length (Figure O 2).
- Position the tool at one end of the room or object and
point the laser dot across the length. (Figure O 2) shows
where to position the tool if you are measuring from the
bottom of the tool.)
- Press to display the length measurement on the
second line of the screen.
8. Measure the height (Figure O 3).
- Position the tool at one end of the room or object and
point the laser dot across the height. (Figure O 3) shows
where to position the tool if you are measuring from the
bottom of the tool).
- Press to display the height measurement on the
third line of the screen.
9. Follow the same steps to measure the width, length, and
height of the second room or object.
10. View the Volume measurement at the bottom of the screen
(Figure O 4).
Measuring the Height of a Tall Object
If you need to measure the height of a tall object (e.g., a tall
building), you can calculate the height based on the distance
to 1 point or the distances from the same point to 2 points
on the object. The tool will use the Pythagorean Theorem
(A
2
+B
2
=C
2
) to calculate the height.
Distance to 1 Point
You can use the distance to one point on a wall or object
(Indirect Height) to determine its height (Figure P).
1. Point the tool's laser (Figure A 1) toward a wall or object, and
not toward anyone's eyes.
2. Press (Figure A 3) to turn the tool on and display the
red laser dot.
3. Make sure the tool position setting (Figure C 4) is correct for
taking the measurement.
4. Select as the measurement type.
- Press to display the Main Menu (Figure E 2).