33
Denotes risk of fire.
Safety Instructions for Lasers
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock,
fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
• Do not operate the laser in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust
or fumes.
• Use the laser only with the specifically designated batteries. Use
of any other batteries may create a risk of fire.
• Store idle laser out of reach of children and other untrained
persons. Lasers are dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one laser, may
create a risk of injury when used on another laser.
• Tool service MUST be performed only by qualified repair
personnel. Repairs, service or maintenance performed by
unqualified personnel may result in injury. For the location of your
nearest authorized DEWALT repair agent, refer to the list of authorized
DEWALT repair agents on back of this manual or visit www.2helpU.
com on the Internet.
• Do not use optical tools such as a telescope or transit to view the
laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause anyone to
intentionally or unintentionally stare into the laser beam. Serious
eye injury could result.
• Do not position the laser near a reflective surface which may
reflect the laser beam toward anyone’s eyes. Serious eye injury
could result.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
ENGLISH
To Next Page
Loading...
