41
• If the difference between the markings is 6 mm or less, the laser head
is properly calibrated.
• If the difference between the markings is more than 6 mm, the laser
head must be calibrated.
Cleaning
• Remove the batteries before cleaning the tool.
• Keep the ventilation slots clear and regularly clean the housing with a
soft cloth.
• When necessary, clean the lens using a soft cloth or a cotton bud
soaked in alcohol. Do not use any other cleaning agents.
Protecting the Environment
Separate collection. This product must not be disposed of with
normal household waste.
Should you find one day that your DEWALT product needs replacement, or
if it is of no further use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of electrical products
from the household, at municipal waste sites or by the retailer when you
purchase a new product.
DEWALT provides a facility for the collection and recycling of DEWALT
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorised
repair agent who will collect them on our behalf.
ENGLISH
To Next Page
Loading...
