DeWalt DW089 - DATE CODE POSITION; Important Safety Instructions for Batteries; Package Contents

DW089/DW089CG
10
E
• Do not place the laser in aposition which may cause anyone
to intentionally or unintentionally stare into the laser beam.
Serious eye injury could result.
• Do not position the laser near areflective surface which may
reflect the laser beam toward anyone’seyes. Serious eye injury
could result.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not remove or deface warning labels. If labels are removed
user or others may inadvertently expose themselves to radiation.
• Position the laser securely on alevel surface. Damage to the
laser or serious injury could result if the laser falls.
WARNING: Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING: Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
WARNING: DO NOT DISASSEMBLE THE LASER.
There are no user serviceable parts inside. Disassembling
the laser will void all warranties on the product. Do not
modify the product in any way. Modifying the tool may
result in hazardous laser radiation exposure.
WARNING: Fire hazard! Avoid short-circuiting the contacts
of aremoved battery.
Additional Safety Instructions for Lasers
• This laser complies with class 2 according to EN 60825-1:2007.
Do not replace alaser diode with adifferent type. If damaged,
have the laser repaired by an authorised repair agent.
• Do not use the laser for any purpose other than projecting laser
lines.
DW089_DW089CG - User Manual - NA - May 2018.indd 10 5/25/2018 10:40:47 AM