DeWalt DW089 - Batteries

DW089/DW089CG
26
E
THE DETECTOR’SSPEAKER MAKES NO SOUND
• Ensure that the detector is on.
• Press the volume button. It will toggle on and off.
• Ensure that the laser is turned on and that it is emitting alaser
beam.
• If the detector is still not making any sound, take it to aD
EWALT
service centre.
THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER LASER
UNIT
• The D
e
WALT Digital Laser Detector has been designed to work
only with the DW088 and the DW089 and certain other compatible
line lasers.
THE DETECTOR GIVES OFF ATONE BUT THE LCD DISPLAY WINDOW DOES NOT
FUNCTION
• If the detector is very cold, allow it to warm up in aheated area.
• If the LCD display window is still not functioning, take the detector
to aD
e
WALT service centre.
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS “ON-GRADE”
SIGNAL
• In the presence of very intense ambient light, the detector may give
afalse or erratic indication of level.
• Reposition the detector out of the intense light or shade the sensor
window (u) to resume normal operation.
Optional Accessories
Using the Laser with Accessories (fig. 1 inset)
The laser is equipped with a1/4" x 20 female thread (i) on the bottom
of the unit. This thread is to accommodate current or future D
e
WALT
accessories. Only use D
e
WALT accessories specified for use with this
product. Follow the directions included with the accessory.
Consult your dealer for further information on the appropriate
accessories.
DW089_DW089CG - User Manual - NA - May 2018.indd 26 5/25/2018 10:40:49 AM