EasyManua.ls Logo

DeWalt DW089K-XJ - Residual Risks; Markings on Tool

DeWalt DW089K-XJ
162 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
56
An exposure of the eye to the beam of a class 2 laser is considered
safe for a maximum of 0.25 seconds. Eyelid reflexes will normally
provide adequate protection. At distances over 1 m, the laser complies
with class 1 and thus is considered completely safe.
Never look into the laser beam directly and intentionally.
Do not use optical tools to view the laser beam.
Do not set up the tool at a position where the laser beam can
cross any person at head height.
Do not let children come in contact with the laser.
Residual Risks
The following risks are inherent to the use of this device:
injuries caused by staring into laser beam.
Markings on Tool
The following pictographs are shown on the tool:
Read the instruction manual before use.
Laser warning.
Do not stare into the laser beam.
DW089K-XJ_DW89CG-XJ User Manual - EU - FEB 2019 - Part A.indd 56 2/7/2019 10:35:52 AM

Related product manuals