To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DW369 and is the answer not in the manual?
General| Amps | 15 |
|---|---|
| Tool Weight | 9.5 lbs |
| Arbor Size | 5/8 inch |
| No Load Speed | 5, 800 rpm |
| Blade Diameter | 7-1/4 in |
| Max Cutting Depth at 90° | 2-7/16 in. |
| Max Cut Depth at 90 degrees | 2-7/16 inches |
Explains safety signal words (DANGER, WARNING, CAUTION) and general safety.
Advice on maintaining a clean, well-lit work area to prevent accidents.
Guidelines for safe use of power tools with electrical systems, including grounding and double insulation.
Essential personal safety measures like staying alert, proper attire, and avoiding distractions.
Instructions on proper tool handling, maintenance, and safe operational practices.
Specific safety warnings and precautions tailored for circular saw operation.
Details on what causes kickback and how operators can prevent it through proper technique.
Identifies key parts of the circular saw, including the end cap, trigger switch, and blade guard.
Information about the tool's motor and power requirements, including voltage and current.
Step-by-step instructions for correctly installing a saw blade onto the spindle.
Detailed guide on removing an old saw blade and installing a new one safely.
Emphasizes the importance of the lower blade guard and its proper function for user safety.
Instructions on how to set the optimal cutting depth for efficient and safe sawing.
Guide to setting the saw blade angle for bevel cuts, with specific ranges for models.
Explanation of the detent mechanism for precise bevel angle setting on specific models.
Describes the kerf indicator on the shoe for guiding vertical and bevel cuts.
How to operate the power switch to start and stop the tool safely.
Proper methods for supporting the material being cut to ensure stability and prevent kickback.
Detailed explanation of kickback, its causes, and preventative measures for safe cutting.
Instructions for cleaning air vents and the recommendation for annual gear case lubrication.
Explanation of the electric brake function and troubleshooting for the DW369 model.
Guidance on where and how to get the tool repaired by qualified personnel.
Procedures for inspecting and replacing carbon brushes for optimal tool performance.
Steps for adjusting the shoe to ensure the blade is perpendicular to the shoe for 90-degree cuts.
Instructions for adjusting the depth adjustment lever on the DW369 model.
Lists recommended blade types, sizes, and tooth counts for various cutting applications.
Information on authorized DEWALT accessories for use with the tool.
Details of the manufacturer's three-year warranty coverage for defects in materials and workmanship.
Offer of a full refund within 90 days if the user is not completely satisfied with the product.
Information on how to obtain free replacement warning labels if they become illegible or are missing.
