Need help?Do you have a question about the DeWalt DW812 and is the answer not in the manual?
Technical specifications including voltage, power, speed, dimensions, and weight.
Definition for imminently hazardous situations resulting in death or serious injury.
Definition for potentially hazardous situations with risk of death or serious injury.
Definition for potentially hazardous situations with risk of minor injury.
Definition for practices not related to injury, but property damage.
Keep all safety warnings and instructions for future reference.
Guidelines for maintaining a safe and clean work area.
Precautions to prevent electric shock hazards.
Stay alert and avoid operating under influence of drugs or fatigue.
Always wear appropriate PPE, including eye protection.
Ensure the switch is off before connecting to power or carrying the tool.
Use the correct tool for the job and avoid forcing it.
Maintain tools properly and have damaged tools repaired before use.
Service the power tool with identical replacement parts by qualified personnel.
General safety instructions applicable to all operations.
Maintain a firm grip and proper body position to resist kickback forces.
Avoid placing hands near accessories and exercise care with edges.
Specific safety rules for grinding, including guards and wheel selection.
Safety precautions for sanding, especially regarding disc size.
Safety for polishing, ensuring no loose parts on bonnets.
Safety for wire brushing, including awareness of bristles and guards.
Lists residual risks such as hearing impairment, injury from particles, burns, and dust.
Explanation of pictograms and date code position on the tool.
Specifies approved applications and prohibited conditions for the angle grinders.
Information on motor voltage matching and double insulation.
Guidelines for selecting and using appropriate extension cables.
Instructions for securely attaching the side handle to the tool.
Procedures for attaching and detaching the protective guard.
Steps for installing and removing grinding discs and flanges.
Steps to perform before starting operation, including accessory checks.
Instructions on how to operate the tool's switch safely.
How to use the spindle lock for accessory changes.
Correct hand positioning for safe and effective control of the tool.
Safety considerations for working with metal, including RCD use.
Warnings related to metal dust build-up and electric shock risk with flap discs.
Guidelines for maintaining and cleaning the power tool.
Warning about using non-DEWALT accessories due to potential hazards.
Instructions for proper disposal and recycling of the product.
To Next Page
General
