DeWalt DW831 - Electrical Safety and Accessories; Assembly and Adjustment; Attaching the Side Handle; Guard Mounting and Removal

English
10
7" (180 mm) Grinding
Wheels (DW840)
Type 27 guard
Type 27 depressed center wheel
5" (125 mm) Grinding
Wheels (DW831)
unthreaded backing flange
Type 27 guard
Type 27 hubbed wheel
clamp nut
Type 27 guard
Type 27 hubbed wheel
Type 27 guard
backing flange
Type 27 non-hubbed wheel
clamp nut
threaded locking flange
CAUTION: Type 1 abrasive and
diamond cut-off wheels may not be
used on this tool. A Type 1 cut-off
wheel guard is not available for these
grinders.