DeWalt DWE4217 User Manual

4
ENGLISH
EC-Declaration of Conformity
Machinery Directive
Small Angle Grinders
DWE4206, DWE4207, DWE4214, DWE4215, DWE4216,
DWE4217, DWE4227, DWE4235, DWE4237, DWE4238,
DWE4246, DWE4257
DEWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:209, EN60745-2-
3:2011+A2:2013+A11:2014 +A12:2014+A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DEWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDEWALT.
Markus Rompel
Director Engineering
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
07.06.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
DWE4227 DWE4235 DWE4237 DWE4238 DWE4246 DWE4257
Voltage V
AC
230 230 230 230 230 230
Type 3 3 3 1 1 1
Power input W 1200
1400 1400 1400 1200 1500
No-load speed min
-1
11000 11500 11500 9300 2800-10000 2800-10000
Rated speed min
-1
11000 11500 11500 9300 10000 10000
Wheel diameter mm 125 125 125 150 115 125
Wheel thickness (max) mm
6.0 6.0 6.0 6.0 6.0 6.0
Spindle diameter M14 M14 M14 M14 M14 M14
Spindle length mm 18.5 18.5 18.5 18.5 20.1 20.1
Weight kg
1.85* 1.85* 1.85* 2.5* 2.5* 2.5*
* weight includes side handle and guard
Noise and vibration total values (triax vector sum) according to EN 60745-2-3:
L
PA
(emission sound pressure level) dB(A) 92.0 92.0 92.0 92.0 92.0 92.0
L
WA
(sound power level) dB(A) 103.0 103.0 103.0 103.0 103.0 103.0
K (uncertainty for the given sound level) dB(A) 3 3 3 3 3 3
Surface grinding
Vibration emission value a
h,AG
= m/s² 8.3 8.3 8.3 8.3 8.3 8.3
Uncertainty K = m/s² 1.5 1.5 1.5 1.5 1.5 1.5
Disc sanding
Vibration emission value a
h,DS
= m/s² 3.0 3.0 3.0 – 3.0 3.0
Uncertainty K = m/s² 1.5 1.5 1.5 – 1.5 1.5

CAUTION: Working with the wire brush or the abrasive cutting can lead to different vibration levels!

DeWalt DWE4217 Specifications

General

Type	Accessory set
Product color	Black, Grey, Yellow
Type of sander	Disc sander
Adjustable speed	-
Housing material	Aluminium, Plastic, Rubber
Dust extraction port	No
Suitable for materials	Ceramic, Metal
Power	1200 W
On/off switch	Yes
Uncertainty K	3 m/s²
Sanding disc thread	M14
Idle speed (max)	11000 RPM
Sound power level	100 dB
Sound pressure level	89 dB
Grinding disc diameter	125 mm
Power source	AC

Weight and Dimensions

Depth	285 mm
Weight	2200 g