Need help?Do you have a question about the DeWalt DWE4227 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No Load Speed | 11, 000 RPM |
| Length | 12.5 inches |
| Height | 4.5 inches |
| No Load RPM | 11, 000 RPM |
| Voltage | 120V |
| Wheel Diameter | 4.5 inches |
| Spindle Thread | 5/8-11 |
| Max. Disc Diameter | 4.5 inches |
Guidelines for maintaining a safe and organized work environment.
Precautions for safe use of electrical power tools.
Measures for operator safety, including PPE and alertness.
General safety rules for grinding, sanding, wire brushing, and cutting-off.
Safety guidelines for cutting-off operations.
Specific safety measures for sanding tasks.
Specific safety measures for wire brushing tasks.
General safety rules applicable to grinders.
Pre-operation checks and setup procedures.
General guidelines and warnings for operating the tool.
Techniques and safety for these operations.
Safety and techniques for edge grinding and cutting.
General maintenance procedures and warnings.
To Next Page
