EasyManua.ls Logo

DeWalt DXCM072-0030 - User Manual

DeWalt DXCM072-0030
26 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DXCM072-0030
Automatic Electronic Tank Drain Kit
Trousse de drainage électronique automatique de réservoir
Kit de drenaje electrónico automático del depósito
INSTRUCTION MANUAL
MODE D’EMPLOI
MODO DE EMPLEO
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERNTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-888-895-4549 • www.DEWALT.com
MAT Industries, LLC, Long Grove, IL 60047
(AUG19) Part No. 200-3146-B DXCM072-0030 Copyright © 2018, 2019 DEWALT

Table of Contents

Questions and Answers

  • T
    Tammy MoyerAug 10, 2025
    What to do if the timer will not activate on my DeWalt DXCM072-0030 Industrial Equipment?
    • M
      Matthew WigginsAug 11, 2025
      If the timer on your DeWalt Industrial Equipment isn't activating, first ensure that the equipment is receiving power. If power is being supplied, the issue might stem from a clogged port or strainer ball valve. Cleaning the valve, as described in the “Maintenance” section, should resolve these blockages.
  • E
    Emma GloverAug 25, 2025
    Why will the valve not close on my DeWalt Industrial Equipment?
    • M
      Mark AndersonAug 25, 2025
      If the valve on your DeWalt Industrial Equipment isn't closing, it might be due to debris obstructing the self-cleaning valve. Cleaning the valve, as outlined in the “Maintenance” section, should resolve this. Alternatively, a short in an electrical component could be the cause. Ensure the power cord is properly connected.

DeWalt DXCM072-0030 Specifications

General IconGeneral
BrandDeWalt
ModelDXCM072-0030
CategoryIndustrial Equipment
LanguageEnglish