To Next Page
D
david75Aug 9, 2025
What to do if my DeWalt DXWP61374 Water Pump runs but moves little water?
- Jjeffery59Aug 9, 2025
If your DeWalt Water Pump runs but isn't moving much water, several issues could be the cause. First, check for any clogs or obstructions in the intake or discharge hose/pipe and remove them. An obstructed impeller can also cause this, so clear any debris. If the discharge hose/pipe is frozen, allow it to thaw. Low line voltage can be a factor; in this case, check the wire size and increase it if needed. Inspect the pump parts for wear, damage, or clogs, cleaning or replacing parts as necessary. Finally, ensure the discharge height doesn't exceed the pump's capacity by checking the performance chart.
General