To Next PageTo Next Page
Need help?Do you have a question about the DeWalt LaserChalkLine DW088CG and is the answer not in the manual?
General| Brand | DeWalt |
|---|---|
| Model | LaserChalkLine DW088CG |
| Category | Portable Generator |
| Language | English |
Comprehensive safety guidelines for laser operation, radiation exposure, and potential hazards.
Guidance on reducing exposure to hazardous dusts generated by tool use and necessary protective measures.
Explanation of symbols found on the laser tool, including voltage and laser classifications.
Important safety warnings regarding laser radiation exposure and product classification.
Details of labels on the DW088 and DW088CG models, including compliance and specifications.
Guidelines for maintaining a safe and organized work environment to prevent accidents.
Precautions for using batteries safely with power tools to prevent fire risks.
Details about the type of batteries used to power the laser tool.
Step-by-step instructions for correctly inserting AA batteries into the laser tool's compartment.
Critical warnings and guidelines to prevent battery explosion, leakage, fire, or injury.
Recommendations for staying alert, maintaining balance, and using appropriate safety equipment during operation.
Instructions for proper tool operation, storage, and the use of recommended accessories.
Information on qualified service, repair procedures, and locating authorized service centers.
Advice for ensuring accurate results, extending battery life, and maintaining tool performance.
Explanation of the red indicator light signaling low battery status and its behavior.
Instructions for powering the horizontal and vertical laser lines on and off individually or simultaneously.
How to interpret the flashing laser beam indicating the tilt range has been exceeded and it's not level.
Details on using the 1/4" thread for accessories and the magnetic pivot bracket for mounting.
Guidelines for maintaining laser accuracy through calibration checks and proper storage conditions.
Proper methods for cleaning the exterior plastic parts of the laser tool.
Procedure to check and verify the accuracy of the horizontal laser beam over a set distance.
Procedure to check and verify the accuracy of the vertical laser beam using available height.
Detailed steps for checking horizontal beam accuracy, including setup and measurement criteria.
Procedure to verify the horizontal beam's pitch accuracy by marking and measuring beam positions.
Steps to check vertical beam accuracy by marking beam positions on the ceiling at different heights.
Solutions for common problems like the laser not turning on or beams flashing or moving.
Details on warranty, authorized service, and the consequences of unauthorized repairs.
Technical specifications for the DW088 and DW088CG laser levels, including light source, power, and range.
Details of the three-year limited warranty covering defects in materials and workmanship.
Information on 1 Year Free Service, 90 Day Money Back Guarantee, and label replacement.
