7
ENGLISH
Chargers
DeWALT chargers require no adjustment and are designed to be as easy as possible
tooperate.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an approved
extension cable suitable for the power input of your charger (see Technical Data). The
minimum conductor size is 1mm
2
; the maximum length is30m.
When using a cable reel, always unwind the cablecompletely.
Important Safety Instructions for All BatteryChargers
SAVE THESE INSTRUCTIONS: This manual contains important safety and operating
instructions for compatible battery chargers (refer to TechnicalData).
• Before using charger, read all instructions and cautionary markings on charger, battery
pack, and product using batterypack.
WARNING: Shock hazard. Do not allow any liquid to get inside charger. Electric shock
mayresult.
WARNING: We recommend the use of a residual current device with a residual current
rating of 30mA orless.
CAUTION: Burn hazard. To reduce the risk of injury, charge only DeWALT
rechargeable batteries. Other types of batteries may burst causing personal injury
anddamage.
CAUTION: Children should be supervised to ensure that they do not play with
theappliance.
NOTICE: Under certain conditions, with the charger plugged into the power supply,
the exposed charging contacts inside the charger can be shorted by foreign material.
Foreign materials of a conductive nature such as, but not limited to, steel wool,
aluminum foil or any buildup of metallic particles should be kept away from charger
• Do not operate the DCB094K DeWALT USB charger if it has received a sharp
blow, been dropped or otherwise damaged in any way. Take it to an authorized
servicecenter.
• Do not disassemble the DCB094K DeWALT USB charger, there are no user
serviceableparts.
• Do not operate the DeWALT USB charger with a damaged power adapter or
USBcable.
• Do not force the power adapter or USB cable into the DeWALT USB charger's
USBport.
To Next Page
Loading...
Need help?
General
