DeWalt XR DCF809 - User Manual

DCF809
Final page size: A5 (148mm x 210mm)
Dansk (oversat fra original brugsvejledning) 4
Deutsch (übersetzt von den originalanweisungen) 10
English (original instructions) 16
Español (traducido de las instrucciones originales) 22
Français (traduction de la notice d’instructions originale) 28
Italiano (tradotto dalle istruzioni originali) 34
Nederlands (vertaald vanuit de originele instructies) 40
Norsk (oversatt fra de originale instruksjonene) 46
Português (traduzido das instruções originais) 51
Suomi (käännetty alkuperäisestä käyttöohjeesta) 57
Svenska (översatt från de ursprungliga instruktionerna) 62
Türkçe (orijinal talimatlardan çevrilmiştir) 68
Ελληνικά (μετάφραση από τις πρωτότυπες οδηγίες) 74

DeWalt XR DCF809 Specifications

General

Voltage	18V
No Load Speed	0-2800 RPM
Impacts Per Minute	0-3200 IPM
Power Source	Battery
Motor Type	Brushless
LED Light	Yes
Tool Holder	1/4 in
Battery Type	Li-Ion
Chuck Type	1/4" (6.35mm) Hex
Weight	2.2 lbs
Weight (without battery)	2.2 lbs

Summary

Technical Data

Batteries

General Power Tool Safety Warnings

Personal Safety

Power Tool Use and Care

Battery Tool Use and Care

Service

Additional Specific Safety Rules for Impact Drivers

Battery Type

Intended Use

ASSEMBLY AND ADJUSTMENTS

Inserting and Removing the Battery Pack from the Tool

Belt Hook and Magnetic Bit Holder

OPERATION

Proper Hand Position

Guidance on the correct way to hold the tool for safety and control.

Variable Speed Trigger Switch

Forward;Reverse Control Button

Quick-Release Chuck

Instructions for installing and removing accessories from the chuck.

USAGE

MAINTENANCE

Cleaning

Optional Accessories

Rechargeable Battery Pack