ENGLISH
3
DCF891 DCF892
Voltage V
DC
18(20 Max) 18(20 Max)
Battery type
Li-Ion Li-Ion
Power output
W 760 760
No load speed min
-1
0–2000 0–2000
Impact rate min
-1
0–3250 0–3250
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Nm
Nm
Nm
Nm
812
136
406
812
812
136
406
812
Max breakaway torque Nm 1084 1084
Tool holder mm 12.7 12.7
Weight (without battery pack) kg
1.67 1.67
Vibration emission value
a
h
=
m/s
2
10 10
Uncertainty K = m/s
2
1.7 1.7
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
20V MAX CORDLESS IMPACT WRENCH
DCF891, DCF892
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
Batteries Chargers / Charge Times (Minutes)
Cat# V
DC
Ah Weight(kg)
DCB104 DCB107 DCB112 DCB115 DCB117 DCB118 DCB132 DCB1112
DCB546/DCB606 18/54 (20/60 Max) 6.0/2.0 1.05 60 270 170 90 40 60 90 40
DCB547/DCB609 18/54 (20/60 Max) 9.0/3.0 1.46 75* 420 270 135* 60 75* 135* 60
DCB548/DCB612 18/54 (20/60 Max) 12.0/4.0 1.44 120 540 350 180 80 120 180 80
DCB181 18 (20 Max) 1.5 0.35 22 70 45 22 22 22 22 22
DCB182/DCB204 18 (20 Max) 4.0 0.61 60/40** 185 120 60 60/40** 60/40** 60 60/40**
DCB183/DCB203 18 (20 Max) 2.0 0.40 30 90 60 30 30 30 30 30
DCB184/DCB205 18 (20 Max) 5.0 0.62 75/50** 240 150 75 75/50** 75/50** 75 75/50**
DCB185 18 (20 Max) 1.3 0.35 22 60 40 22 22 22 22 22
DCB187 18 (20 Max) 3.0 0.54 45 140 90 45 45 45 45 45
DCB189/DCB240 18 (20 Max) 4.0 0.54 60 185 120 60 60 60 60 60
DCB186 18 (20 Max) 6.0 0.95 60 270 170 90 60 60 90 60
*Date code 201811475B or later
**Date code 201536 or later
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
To Next Page
Loading...
Need help?
General
