DeWalt XR DCMPW1600 User Manual

5
ENGLISH
EC-Declaration of Conformity
Machinery Directive
o
CORDLESS PRESSURE CLEANER
DCMPW1600
DeWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN 60335-1:2012+A11:2014+A13:2017+A1:2019+
A14:2019+A2:2019+A15:2021, EN60335-2-79:2012.
2000/14/EC, Annex V
L
WA
(measured sound power level) 93 dB(A)
Uncertainty (K) = 4.3 dB(A)
L
WA
(guaranteed sound power) 97 dB(A).
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
04.21.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY SAFETY
REGULATIONS 2008
CORDLESS PRESSURE CLEANER
DCMPW1600
DeWALT declares that these products described under Technical
Data are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2
:2019+A15:2021, EN60335-2-79:2012.
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended).
Schedule 8.
L
WA
(measured sound power level) 93 dB(A)
Uncertainty (K) = 4.3 dB(A)
L
WA
(guaranteed sound power) 97 dB(A).
These products conform to the following UK Regulations:
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised
test given in EN 60335-2-79 and may be used to compare one
tool with another. It may be used for a preliminary assessment
ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCMPW1600
Voltage Input
2x18 V
DC
Battery type
Li-Ion
Type
1
Rated Flow Rate
4.5 L/min
Max Water Flow Rate
5.5 L/min
Rated Pressure
110 Bar / 1600PSI / 11 MPa
Maximum Pressure
165 Bar / 2390PSI / 16.5 MPa
Maximum Inlet Temperature
50 ˚C
Maximum Input Pressure
1 Mpa (10 Bar)
Prepulsive Force of the Gun to the
Maximum Pressure
21N
Motor Protection
IPX5
Inlet Water
Cold clear water
Weight
10,9 kg
Noise values and/or vibration values ( triax vector sum ) according to EN60335-2-79
N&V test data:
Emission sound pressure level L
PA
: 79.0 dB(A); K=3.0 dB(A)
Measured sound power level: L
WA
: 93.0 dB(A); K=4.3 dB(A)
Vibration emission value ah: less than 2.5 m/s
2
; K=0.5 m/s
2
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
CORDLESS PRESSURE CLEANER
DCMPW1600

DeWalt XR DCMPW1600 Specifications

General

Brand	DeWalt
Model	XR DCMPW1600
Category	Pressure Washer
Language	English