DeWalt XR DCMWP134N - Technical Data; Noise and Vibration Values; Hand;arm Weighted Vibration Value; EC-Declaration of Conformity

45
ENGLISH
45
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
EC‑Declaration of Conformity
Machinery Directive
o
2x18V Mower
DCMWP134, DCMWSP156
DeWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN 62841-1:2015 + A11:2022; EN IEC 62841-4-
3:2021 + A11:2021.
These products also comply with Directive 2014/30/EU and
2011/65/EU.
2000/14/EC, Lawnmower, 50< L ≤ 70, Annex VI DEKRA
Testing and Certification GmbH, Handwerkstraße 15,
70565Stuttgart, Germany
Notified Body ID No.: 0158
Level of acoustic power according to 2000/14/EC
(Article12,Annex VI, 50< L ≤ 70cm):
L
WA
(measured sound power) 83dB(A)
Uncertainty (K) = 0.8 dB(A)
L
WA
(guaranteed sound power) 88dB(A)
For more information, please contact
DeWALT at the following
address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
08.24.2023
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in
EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCMWP134 DCMWSP156
Voltage V
DC
2x18 2x18
Battery type Li‑Ion Li‑Ion
No load speed /min 2500 2500
Maximum speed /min 2800 2800
Blade Length cm 53 53
Weight kg 28 30
Noise values and vibration values (triax vector sum) according to EN62841‑1
L
PA
(emission sound pressure level) dB(A) 77 77
K
(uncertainty for the given sound level) dB(A) 3 3
L
WA
(sound power level) dB(A) 83 83
K
(uncertainty for the given sound level) dB(A) 0.8 0.8
Hand/arm weighted vibration value:
Vibration emission value a
h
= m/s
2
2.5 2.5
Uncertainty K = m/s
2
1.5 1.5
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make
DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
DCMWP134 2X18V MOWER
DCMWSP156 2X18V SELFPROPELLED MOWER