DeWalt XR Li-Ion DCB1112 User Manual

6
ENGLISH
Read instruction manual beforeuse.
See Technical Data for chargingtime.
Do not probe with conductiveobjects.
Do not charge damaged batterypacks.
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge DeWALT battery packs only with designated
DeWALT chargers. Charging battery packs other
than the designated DeWALT batteries with a
DeWALT charger may make them burst or lead to
other dangeroussituations.
Do not incinerate the batterypack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3batteries of 36Wh).
Package Contents
The package contains:
1 Battery charger
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by DeWALT is under license. Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Date Code Position (Fig. A)
The date code
4
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2020 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Battery
2
Battery release button
3
Charger
Intended Use
The DCB1106 charger is designed for charging 10.8V (12V
Max) and 18V (20V Max) DeWALT Li-Ion XR and XR FLEXVOLT
battery packs: DCB122, DCB124, DCB125, DCB127, DCB181,
DCB182, DCB183, DCB184, DCB185, DCB187, DCB189, DCB203,
DCB204, DCB205, DCB546, DCB547, DCB548, DCB606, DCB609
andDCB612.
The DCB117 chargers is designed for charging 18V (20V Max)
DeWALT Li-Ion XR and XR FLEXVOLT battery packs: DCB181,
DCB182, DCB183, DCB184, DCB185, DCB187, DCB189, DCB203,
DCB204, DCB205, DCB546, DCB547, DCB548, DCB606, DCB609
andDCB612.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
These battery chargers and battery packs are professional
powertools.
Charging a Battery (Fig. A)
1. Plug the charger into an appropriate outlet before inserting
batterypack.
2. Insert the battery pack
1
into the charger, making sure the
battery pack is fully seated in the charger. The red (charging)
light will blink repeatedly indicating that the charging
process hasstarted.
3. The Stage 1 Charging blink indicator represents the charge
process that charges approximately 80% of the battery's
capacity. Stage2 Charging blink indicator represents the
remainder, or top off charge process, for the battery to reach
fullcapacity.
4. The completion of charge will be indicated by the light
remaining ON continuously. The battery pack is fully
charged and may be removed and used at this time or left
in the charger.
NOTE: To ensure maximum performance and life of lithium-ion
battery packs, charge the battery pack fully before firstuse.

DeWalt XR Li-Ion DCB1112 Specifications

General

Brand	DeWalt
Model	XR Li-Ion DCB1112
Category	Battery Charger
Language	English