Need help?Do you have a question about the DeWalt XR Li-Ion DCG406 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Power Source | Cordless |
| Battery Type | XR Li-Ion |
| Voltage | 18V |
| Disc Diameter | 125 mm |
| No Load Speed | 9000 RPM |
| Weight | 1.7 kg (with battery) |
| Spindle Thread | M14 |
| Brake | Yes |
Details on voltage, battery type, power output, speed, dimensions, and weight of the grinder.
Defines signal words like DANGER, WARNING, CAUTION, and NOTICE for hazard communication.
Guidelines for maintaining a safe and well-lit work environment.
Instructions to prevent electric shock, including cord care and grounding.
Advice on staying alert, using PPE, and preventing unintentional starts.
Guidance on proper tool usage, maintenance, and preventing misuse.
Instructions for charging and using battery packs safely.
Guidance on tool servicing and general operational safety rules.
Methods to avoid kickback during tool operation.
Specific warnings for grinding, abrasive cutting, and related operations.
Safety rules for sanding, wire brushing, and grinder operations.
Information on residual risks and essential electrical safety measures.
Guidelines for safe charger use, plug replacement, and extension cords.
Steps for connecting and charging a battery pack.
Explanation of the charge status indicators on the charger.
Details on the charger's feature for battery temperature management.
Description of the tool's system for battery protection.
Instructions and considerations for mounting chargers on a wall.
Safety precautions and methods for cleaning the charger.
Important safety instructions for battery packs and transportation guidelines.
Information on the two modes of the FLEXVOLT™™ battery.
Advice on the best conditions for storing battery packs.
Explanation of labels found on chargers and battery packs.
Details on compatible battery types and what is included in the package.
Explanation of pictograms and symbols found on the tool.
Location of the date code, indicating the year of manufacture.
Identification of the tool's parts with numbered labels.
Specifies the intended applications for the angle grinder.
Description of key features like Kickback Brake and Soft Start.
Instructions for inserting and removing the battery pack from the tool.
Steps to detach the battery pack from the tool.
Explanation of the fuel gauge feature on some battery packs.
Procedure for securely attaching the side handle.
Instructions on how to rotate the gear case for optimal use.
Guidance on using guards with various accessories.
Steps for installing and adjusting the one-touch guard.
Instructions for fitting wheels without a hub.
Procedure for attaching sanding backing pads and discs.
Steps for installing wheels that fit directly onto the spindle.
Instructions for fitting wire cup brushes and wire wheels.
Checks and preparations before starting tool operation.
General guidelines for safe and effective tool operation.
Correct hand placement for optimal control and safety.
How to use the paddle switch for starting and stopping the tool.
Instructions for using the spindle lock button.
Techniques for surface grinding, sanding, and wire brushing.
Safety measures when working with painted surfaces.
Warnings and procedures for edge grinding and cutting applications.
Guidelines for safely cutting metal with bonded abrasives.
Best practices for rough grinding operations.
Instructions for dry cutting stone with appropriate discs.
General advice for working with the tool.
Guidance on tool upkeep, cleaning, and lubrication.
Information on recommended accessories for use with the tool.
Information on battery pack replacement and recycling.
Details for fitting a depressed centre grinding disc.
Instructions for fitting a flap wheel accessory.
Guidance for fitting wire wheels.
How to fit wire wheels that use a threaded nut.
Instructions for fitting wire cup brushes with a threaded nut.
How to fit a wire brush accessory.
Procedure for fitting backing pads and sanding sheets.
Fitting instructions for masonry cutting discs.
Guidance for fitting metal cutting discs.
Instructions for fitting diamond cutting wheels.
To Next Page