Need help?Do you have a question about the DeWalt XR LI-ION DCG405 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| No Load Speed | 9000 RPM |
| Disc Diameter | 125 mm |
| Spindle Thread | M14 |
| Weight | 1.75 kg |
| Power Source | Battery |
| Wheel Diameter | 125 mm |
| Battery Type | Li-Ion |
| Switch Type | Slide |
Essential safety practices for operating power tools safely.
Rules for safe use of electrical power tools and avoiding shock.
Advice on staying alert, using PPE, and maintaining balance.
General safety rules applicable to all operations of the tool.
Explains kickback and how to prevent it.
Safety precautions specific to grinding and cutting tasks.
Further safety advice for abrasive cutting tasks.
Safety precautions for sanding operations.
Safety precautions for wire brushing operations.
Extra safety advice specifically for grinder use.
Precautions for using sanding discs and paper.
Safety advice for using wire brushes and handling bristles.
Details features like Kickback Brake, Overload Protection, Soft Start, etc.
Important safety warnings before performing adjustments or assembly.
Essential checks and setup steps before operating the tool.
General guidance for safe and effective tool operation.
Illustrates correct hand position and explains slider switch operation.
Safety advice for edge grinding and cutting operations.
To Next Page
