DeWalt XR Li-Ion DCS369 - Page 6

4
ENGLISH
DCS369
Voltage V
DC
18 (20 Max)
Battery type Li-Ion
No-load speed min
-1
0–2800
Stroke length mm 16
Cutting capacity in wood/metal profiles/plastic tubes mm 90/40/90
Weight (without battery pack) kg 1.43
WARNING: To reduce the risk of injury, read the
instructionmanual.
English (original instructions)
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
RECIPROCATING SABRE SAW
DCS369
Batteries Chargers/Charge Times (Minutes)
Cat # V
DC
Ah Weight (kg)
DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119
DCB546/DCB606 18/54(20/60 Max) 6.0/2.0 1.05 60 270 170 140 90 60 90 X
DCB547/DCB609 18/54(20/60 Max) 9.0/3.0 1.46 75 420 270 220 135 75 135 X
DCB548/DCB612 18/54(20/60 Max) 12.0/4.0 1.44 120 540 350 300 180 120 180 X
DCB181 18(20 Max) 1.5 0.35 22 70 45 35 22 22 22 45
DCB182/DCB204 18(20 Max) 4.0 0.61 60/40 185 120 100 60 60/40 60 120
DCB183/DCB203 18(20 Max) 2.0 0.40 30 90 60 50 30 30 30 60
DCB184/DCB205 18(20 Max) 5.0 0.62 75/50 240 150 120 75 75/50 75 150
DCB185 18(20 Max) 1.3 0.35 22 60 40 30 22 22 22 X
DCB187 18(20 Max) 3.0 0.54 45 140 90 70 45 45 45 90
DCB189 18(20 Max) 4.0 0.54 60 185 120 100 60 60 60 120
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
powertool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust orfumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to losecontrol.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electricshock.
b ) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed orgrounded.
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electricshock.