Need help?Do you have a question about the DeWalt DWE560-XE and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Power Input | 1350 W |
| No Load Speed | 5500 rpm |
| Blade Diameter | 184 mm |
| Blade Bore | 16 mm |
| Max. Depth of Cut at 90º | 65 mm |
| Cable Length | 2 m (6.6 ft) |
Covers work area, electrical, personal safety, and tool use/care.
Details service, extension cords, and general saw safety instructions.
Focuses on kickback causes, lower guard, and additional circular saw safety.
Instructions for safely installing and replacing saw blades.
How to set the cutting depth and adjust the bevel angle for cuts.
Using cut length indicators and adjusting the cord protector position.
Mounting and adjusting the rip fence for parallel cuts.
Correct hand placement, switch operation, and workpiece support for safe use.
General advice on starting cuts, handling stalls, and withdrawing the saw.
Techniques for specific cuts and avoiding kickback.
Guidance on working with specific materials like wet or treated lumber.
Procedures for cleaning the tool and performing repairs.
Inspecting motor brushes and adjusting the foot plate for accuracy.
Recommendations for blade types and advice on blade maintenance.
To Next Page
