Need help?Do you have a question about the DeWalt DWE575 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Blade Diameter | 7-1/4 inches |
| No Load Speed | 5, 200 RPM |
| Bevel Capacity | 57 degrees |
| Depth of Cut at 90° | 2-9/16 inches |
| Weight | 8.8 lbs |
| Arbor Size | 5/8 inches |
| Electric Brake | No |
| Dust Port | Yes |
| Amperage | 15 A |
| Depth of Cut at 45° | 1-7/8 inches |
Imminent hazard leading to death or serious injury.
Potential hazard leading to death or serious injury.
Understanding and avoiding kickback scenarios.
Checks for guard closing, spring, and knife alignment.
Ensure guards fitted, select correct blade, wear mask.
Emphasizes the guard's importance and proper function.
Improper support, depth, twisting, dull blades.
Grip, blade binding, restart procedures.
Correct grip for safe operation.
Proper methods for supporting materials.
Avoid resting upside down, secure base plate.
Procedure for handling saw stalls.
Disconnect power before maintenance.
To Next Page
