DeWalt DWE575 User Manual

ENGLISH
7
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or seriousinjury.
SAVE ALL WARNINGS AND
INSTRUCTIONS
FOR FUTUREREFERENCE.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
powertool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust orfumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to losecontrol.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electricshock.
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DWE575
Voltage V
AC
230
UK & Ireland V
AC
115
Type 1
Power input W 1600
No-load speed min
-1
5200
Blade diameter mm 184
Maximum depth of cut mm 65
Blade bore mm 20
Bevel angle adjustment 57˚
Weight kg 4.0
Noise values and/or vibration values (triax vector sum) according to EN62841-2-5:
L
PA
(emission sound pressure level) dB(A) 91
L
WA
(sound power level) dB(A) 102
K (uncertainty for the given sound level) dB(A) 4
Cutting wood
Vibration emission value a
h,W
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total workingperiod.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
workpatterns.
English (original instructions)
184 mm CIRCULAR SAW
DWE575

DeWalt DWE575 Specifications

General

Power Source	Corded
Blade Diameter	7-1/4 inches
No Load Speed	5, 200 RPM
Bevel Capacity	57 degrees
Depth of Cut at 90°	2-9/16 inches
Weight	8.8 lbs
Arbor Size	5/8 inches
Electric Brake	No
Dust Port	Yes
Amperage	15 A
Depth of Cut at 45°	1-7/8 inches