Operation
Notes
02
1. Timer dial: 2 to 8 hours or dusk to dawn and daily repeat function.
2. MODE: To select one of the following light set programs.
on→flash/fade→flash→chase
3. Sensor: Sensor will turn timer on at dusk and off at dawn.
4. LED indicator：
on- always on steady.
flash/fade-flashing and fading.
flash-flashing randomly.
chase-3 outlets flashing in turn（mode activated when 2 or 3 outlets
are used）.
5. Outlets: Plug the LED lamps or Tungsten lamps to be controlled by the
timer into outlet.
Rotate the dial on the timer to select one of the following settings:
OFF：No power
ON：Constant power
DUSK-DAWN：On at dusk, off at dawn automatically*
2 Hrs：On at dusk, stays on for 2 hours*
4 Hrs：On at dusk, stays on for 4 hours*
6 Hrs：On at dusk, stays on for 6 hours*
8 Hrs：On at dusk, stays on for 8 hours*
*Cycle repeats every 24 hours.
*The function will start instantly when you cover the lighting sensor by
moving the sensor switch.
To Next Page
Loading...