Dummy Arms – serve as side rails, along
with the hugger arms, for the flatbed.
Hugger Arms – squeeze together to grip
the bale and lift it onto the flatbed. When
the arms are stored they serve as side
rails for the flatbed.
Headache Rack – protects the rear
pickup window. The hydraulic fluid tank
and the valve are also located in the
bottom, left side of the headache rack.
Gooseneck Hitch – is located under a
door in the middle of the bed.
Hitch Plate – has three holes for towing.
SAFETY WARNING!
Do not exceed chassis manufacturer’s
recommended towing capacity.
Optional Toolbox & Fender Skirt –
mount under the bed on both sides. The
Electric / Hydraulic power unit mounts
inside of the toolbox on the left side.
Remote Hand Control – operates the
functions of the flatbed. Uses two AAA
batteries.
Feature Identification
To Next Page
Loading...