What to do if Dexcowin Medical Equipment X-ray emission works, but exposure is too dark?
If the X-ray emission works, but the exposure is too dark, it could be due to a defective receptor, in which case you should change the receptor or compare with another one. Alternatively, the exposure time may be too long, so decrease the exposure time. It could also indicate a defective device, so call a qualified service technician.
What to do if Dexcowin COCOON DX-7020 Medical Equipment X-ray emission works, but exposure is too light or completely white?
If the X-ray emission works, but the exposure is too light or completely white, it could be due to a defective receptor, so call a qualified service technician. It may also be caused by incorrect positioning of the exposure, so adjust the position according to the user manual. Also, the exposure time may be too short, so increase the exposure time. Finally, it could indicate a defective device, so call a qualified service technician.
What to do if Dexcowin Medical Equipment has no X-ray emission?
If there is no X-ray emission, it may be because the generator is preparing an exposure. In this case, wait for it to be ready for X-ray exposure (about 5 seconds). Alternatively, the button or trigger may be defective, so call a qualified service technician.
How to fix Dexcowin COCOON DX-7020 Medical Equipment when nothing lights up?
If nothing lights up on your Dexcowin Medical Equipment, the battery is likely low. Connect the battery charger to resolve this issue.
Defines device use, target users, and prohibited applications.
Guides on unpacking and verifying all included components.
Details essential checks before initial use for proper condition and functionality.
Outlines the key features and functionalities of the COCOON device.
Lists the technical specifications of the device components.
Step-by-step instructions for charging internal and external batteries.
Covers radiation safety, warnings, and diagnostic reference levels for X-ray exposure.
Details safe procedures for cleaning the device and handling precautions.
Specifies conditions and precautions for secure storage and safe transportation.
Lists critical warnings and cautions for safe and proper product usage.
Details cautions related to product inspection and storage conditions.
Lists essential checks to perform on the device before operating it.
Explains the setup and performance of the back scatter shield for radiation control.
Covers detachable and external battery types and their connection for operation.
Guides on checking power status and battery charge levels.
Details how to perform basic function checks on the device.
Explains powering up, checking battery status, and initial operation.
Explains patient and sensor positioning for optimal X-ray exposure.
Describes the main control screen and how to adjust various parameters.
Step-by-step guide for initiating and completing an X-ray exposure.
Details how to set exposure time and parameters based on tooth type.
Covers how to adjust power save time, sound effects, and other screen settings.
Provides a sequential guide for operating the device, including parameter selection and exposure.
Provides instructions for safely replacing the device's handle.
Lists common issues and checks to perform before requesting service and troubleshooting steps.
Outlines ongoing checks, annual user checks, and calibration requirements.
Details the core technical specifications of the device, generator, and X-ray tube.
Provides information on electromagnetic compatibility and interference guidelines.
Explains the manufacturer's warranty terms, coverage, and battery replacement recommendations.
General| Category | Medical Equipment |
|---|---|
| Model | COCOON DX-7020 |
| Manufacturer | Dexcowin |
| Power Supply | AC 100-240V, 50/60Hz |
| Battery | Rechargeable Li-ion battery |
| Interface | USB |
To Next Page
