13
Recommended separation distances between portable and mobile RF communications
equipment and the EQUIPMENT or SYSTEM for EQUIPMENT and SYSTEMS that are not
LIFE-SUPPORTING
Accessories
Recommended separation distances between portable and mobile RF
communications equipment and this camera
This camera is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of this camera can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and this camera as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of transmitter m
150 kHz to 80 MHz 80 MHz to 800 MH 800 MHz to 2,5 GHz
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
Part Description Part Number
Camera Holster PLU7611H
USB Quick-disconnect Cable PLU7631C
Intra-oral Camera Sheaths
Case (5 boxes - 500 count) PLU7611S
DEXcam4 HD EN.book Page 13 Monday, January 16, 2017 2:12 PM