Lithium battery is designed for outdoor use (IP65). But please avoid direct sunlight, rain ex-
posure, snow laying up during installation and operation.
Please make sure the installation site meets below conditions:
◆
Not in direct sunlight.
◆
Not in areas where highly flammable materials are stored.
◆
Not in potential explosive areas.
◆
Not in the cool air directly.
◆
Not higher than altitude of about 2000 meters above sea level.
◆
Not in environment of precipitation or humidity (>95%).
5.2
Installation Location
Make sure that the installation location meets the following conditions:
The area is completely water proof.
The wall is flat and level.
There are no flammable or explosive materials.
The ambient temperature is within the range from -20°C to 50°C.
The temperature and humidity are maintained at a constant level.
There is minimal dust and dirt in the area.
The distance from heat source is more than 2 meters.
The distance from air outlet of inverter is more than 0.5 meters.
Do not cover or wrap the battery case or cabinet.
Do not place at a children or pet touchable area.
The installation area shall avoid of direct sunlight.
There are no mandatory ventilation requirements for battery module, but please avoid of in-
stallation in confined area. The aeration shall avoid of high salinity, humidity, or temperature.
CAUTION
If the ambient temperature is outside the operating range, the battery pack stops operating to
protect itself. The optimal temperature range for the battery pack to operate is 15°C to 35°C.
Frequent exposure to harsh temperatures may deteriorate the performance and life of the bat-
tery pack.
5.3
Mounting the Battery
CAUTION
Remember that this battery is heavy! Please be careful when lilting out from the package.
5.3.1 Wall-Mounted method
The installation location description should meet the size requirements of the figure below:
To Next Page
Loading...
Need help?
General
