Deye Spring RW-M6.1 - Batteries in Parallel; Parallel Mode 1 (≤ 6 kW Inverter); Parallel Mode 2 (≥ 6 kW Inverter)

~ 16 ~
5.4 Batteries in parallel
5.4.1 Parallel mode 1 (It is suitable for scenarios where the inverter power ≤ 6kW)
CAUTION
It should be noted that the maximum current of the first battery is 120A (inverter power
must not exceed 6kW), exceeding 120A will cause heating of the connectors and cable, and
in severe cases, it will cause a fire accident.
If the inverter power exceeds 6kW, the parallel mode must be used mode 2!
Schematic diagram of parallel connection of low-power system batteries:
5.4.2 Parallel mode 2 (It is suitable for scenarios where the inverter power ≥ 6kW)
Schematic diagram of parallel connection of high-power system batteries: