82
"
Supported Softwares
You must first install VIA
®
Service Pack prior to installing any other
drivers. However, this may not be the case for some AGP cards.
Please read carefully the following information.
Important:
The VGA driver that came with some AGP cards is already
bundled with the AGP VxD driver. Since the version of the
bundled VxD driver may be older than the one provided in the
CD, installing the bundled VxD driver may cause problems. If
you are using this type of card, we recommend that you install
first the AGP cards VGA driver before installing the VIA Service
Pack.
To install the VIA Service pack, please follow the steps below.
1. Insert the CD that came with the system board package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click VIA Service Pack.
3. The Welcome screen will appear. Click Next. Please read the
VIA Service Pack readme carefully before proceeding to step 4.
4. Follow the prompts on the screen to complete the installation.
5. Reboot the system for the drivers to take effect.
4.4 Audio Drivers (CA64-TC)
The CD in the system board package also includes audio drivers for
Windows
95, Windows
98, Windows
98 SE, Windows
ME,
Windows NT
4.0 and Windows
2000 operating systems. For
installation instructions or information about their corresponding
readme, click the Read Me button in the autorun screen. The
autorun screen normally appears after the CD is inserted into a
CD-ROM drive.
To Next Page
Loading...
