DFI Clockwork V2 Delay - Auto Regen Sweep

15
Chapter 5 - Auto Regen Sweep
When you activate this feature the pedal automatically sweeps the Regeneration
parameter to the maximum value, hold it there, and sweeps it back to the previ-
ously set value - It’s like having someone turns the REGEN knob while you’re
playing. Used judiciously, this feature introduces useful dynamic elements to the
delay texture.
Press and hold [Select-Tap / Variation].
REGEN
The Regeneration parameter gradually
sweeps to maximum value (as if someone
slowly turns the Regen knob all the way
up).
As long as you hold the footswitch down, the
Regen parameter stays at its maximum
value and both LEDs keep on flashing.
REGEN
When you finally release the footswitch, the
Regen parameter slowly sweeps back to
the previously set value.