Requirements
Hardware
pyboard V1.1 x1
Gravity: I/O Expansion Shield for Pyboard x1
Gravity 3pin sensor Cable (or several DuPont Cables) x1
MicroUSB Cable x1
Gravity: Analog Sound Sensor x1
9g Metal Gear Micro Servo x1
Software
uPyCraft IDE, Click to download uPyCraft IDE. The uPyCraft IDE is recommended.
PuTTY, click to download PuTTY
Case 1：Analog Sound Sensor
Connection Diagram
As shown below,connect the sensor to the X5 port of the expansion shield.
To Next Page
Loading...